Low profile scales represent the site – completely welded construction made from metal, which is supported by four strain gauges, four adjustable legs, also it has a weight indicator. The display is equipped with a bright LED indication. The manufacturer provides with a function of weight retention, allowing the fixation of weighing information after removing the load from the balance, as well as the function of setting the upper and lower limits of weighing (beep), counting mode, summation and zeroing. The scales have an automatic power saving mode and the ability to select weighing units. The platform is connected to the indicator by a 3-meter wire. At the request of the customer, RS-232 interface can be installed to connect the device to a PC.
Power is supplied from the built-in battery up to 60 hours without recharging and from the mains.
Scales are covered with polymer paint of TM “Farbex”.
Specialists of the company can make scales of the non-standard sizes and values under the order.
Scales correspond to DSTU EN 45501: 2007.
|Maximum weighing limit, t.||0,6/1/2/3|
|Minimum weighing limit, kg||5/10/20/20|
|Verification scale interval, kg||0,2/0,5/1/1|
|Compensation of tare weight, t||0,6/1/2/3|
|Types of indicator||LED|
|Height of display characters||25 mm|
|Number of indicators||1-Weight|
|Operating temperature range||-10 to + 40C°|
|The material of the indicator||ABS plastic/metal|
|Platform material||Steel + smooth flooring 3mm|
|Accumulator||4V 4.5 Ah (48x48x108 mm))|
|Duration of operation with auxiliary power supply||60 hours|
|Power||220V /50Hz from network or built-in battery|
|Battery charge time||8 hours|
|Device weight, kg||To 2.5|
|Ability to install the indicator on the stand||Yes|
|Audible signal of overloading the balance||Yes|
|Standby mode when not using the balance||Yes|
|Automatic zero setting||Yes|