Construction lift

High-rise construction mast and facade lifts

(Русский)

(Русский) Двухмачтовые
Carrying capacity - (Русский) от 300 до 1000 кг
Lifting height - (Русский) от 1 до 150 м
Lifting speed - (Русский) 5,5 м/мин

To service housing estates, you should focus on equipment that provides new heights and helps speed up the process of working in the complex.

These are front (construction cradles) and mast lifts.

Electric facade lifts are designed for finishing and maintenance work on building facades. The kit usually includes consoles for hanging the cradle on the roof of the building, a portable control panel, a rope, a cable, a safety catcher in case of a break in the load rope, a counterweight, etc. The equipment provides the lifting of one or two workers, building materials and tools directly to the place of work outside residential and non-residential buildings and structures.

Model LT-11A is an example of a front elevator.

A single-suspended cradle must be suspended on one hoisting rope and have one safety rope; for a two-suspended cradle, the number of these ropes is doubled. Single-mast lifts are convenient for work in floor openings and in internal shafts of a building.

The stability of the lifts during operation and during any maneuvers is determined by calculation, and in order to exclude swinging, they can be equipped with devices to support the structure.

Mast lifts are inherently designed to lift personnel or various loads. They are installed outside or inside buildings and are used to lift various loads into openings or to the floors of buildings. They are a mast that is attached to the wall of the building.

Also suitable for facade work and used as an assembly platform. They can be used in the construction of any object with a vertical wall.

By the design of the cargo platform, they can be divided into purely cargo and cargo-passenger. By the type of construction, one-, two- or three-mast lifts can be distinguished. Thanks to this separation, the required maximum load capacity can be achieved.

You can request an individual miscalculation by entering your data in the feedback box.

Two-mast lifts have twice the working surface and 2-3 times the lifting capacity.The working platform can have a different design, depending on the purpose. It can be simply a roll-out platform with a low lattice fence on 3 sides and a hinged panel on 4 sides, or no fencing at all.The stability of the lifts during operation and during any maneuvers is determined by calculation, and in order to exclude swinging, they can be equipped with devices to support the structure.

    Order lift

    Complete the form and we will contact you
    within a few minutes